Miller® 103-T-250-J Series Fiber Optic Jacket Removal Device

Miller® 103-T-250-J Series Fiber Optic Removal Tool Features & Specifications
   

• Three-hole model performs all common fiber stripping functions in one compact tool
  •  Hole for removal of 2 to 3 mm fiber jackets
  •  Remove 900 tight buffer to 250 micron buffer coating
  •  Standard 250 to 125 micron stripping
• 1st Hole removes 1.6 to 3 mm fiber jacket
• 2nd Hole removes 600 to 900 micron buffer
• 3rd Hole removes 250 micron acrylate
• Compliant thermoplastic elastomer handle grips.
• Ergonomically designed to fit comfortably in either hand, reducing the risk of injury from the repetitive stripping function.
• Same consistent quality and features found in our standard FO 103-S tool
• Also available:  Fiber Optic Stripper for 400 micron coated PM Fiber (Part No.: 80740)
• Factory set blade notches that require no adjustments and do not scratch or nick the fiber
• Made in the U.S.A.
• Length: 5.375 in. (137 mm)
• Weight: 2.5 oz (71 g)

The ONLY fiber stripper with stripping holes produced by the precise and repeatable wire EDM process is the Miller® FO 103 Series of fiber optic strippers. Other competitive tools utilize a grinding process to shape the stripping hole geometry. Tools from the Miller FO 103 series are factory set and cannot be calibrated or altered. The tool's functionality may be periodically checked. A fine plastic bristles brush can be used to clean the instrument before and during the inspection in order to remove any debris from the entrance. Use dry compressed air to clean the aperture.

Operating Instructions

1. Insert fiber into the appropriate opening of the tool
2. Close the tool squarely around the fiber. Grasp firmly, do not squeeze hard.
3. Draw the tool along the fiber while keeping the tool perpendicular to the fiber.
4. Clean the stripped fiber and terminate the end per the splice or connector manufacturer’s instruction