Fiber Alignment | IPAAS Active Cladding Alignment |
Fiber Type | 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable |
Fiber Count | Single Fiber |
Fiber Dimensions | Cladding Diameter: 125μm, Coating diameter: 150μm~3mm |
Fiber Setting & Cleaved Length | 0.20in to 0.63in |
Splicing Modes | Splice Mode: 300, Heat Mode: 100 |
Typical Splice Loss | SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB |
Return Loss (dB) Min | > 60dB |
Splicing Time | Typical 7 sec with SM |
Sleeve Heating Time | Typical 13sec with IS-60 mode, IS-60 sleeve |
Applicable Protection Sleeves | 2.4in, 1.5in and Micro Sleeves |
Storage of Splice Result | Data: 5,000ea up to, Image: 5,000ea up to |
Tension Test | 1.96N to 2.25N |
Operating Conditions | Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
Storage Conditions | Temperature: 40°F~176°F, Humidity: 0~95% |
Dimensions | 132(W) x 212(L) x 73(H)mm (without rubber protector) |
Weight | 3.3lbs (1.5kg, including battery) |
Fiber View & Magnification | X/Y: 110X, Max: 220X |
Power Supply | Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
Number of Splice Cycles with Battery | Typically 200 Cycles |
Electrode Life | 38,000 Splices |
Blade Life | 75,000 |
Terminals | USB |