Search
Filters
Close

In-Line Fixed 9/125 Cable Attenuator 10dB

Item No: FT-ILFA-10
MFG Part#: FT-ILFA-10
Manufacturer: Fibertronics, Inc.
*
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
$59.00

Fibertronics, Inc.’s in-line fixed cable attenuator is built to meet your low reflection attenuation requirements. Each cable assembly is custom built to meet your needs. We provide up to 10 meters of cable and fiber optic connector style of your choice.

In the 5dB, 10dB, 15dB and 20dB versions, these fiber optic fixed attenuators hold a +/-.5dB tolerance. Fiber optic connector options include ST, FC, FC/APC, LC, LC/APC, SC, SC/APC

You can inquire about different designs and features for individual applications by using the Contact Us portion of the website.

 


 

In-Line Fixed Cable Attenuator Features

  • Available in UPC or APC configurations.
  • Custom dB levels available
  • Low insertion loss
  • Interchangeable for a wide range of products
  • Easy to install

 

In-Line Fixed Cable Attenuator Applications

  • Optical Power Control and Equalization in Multi-Channel Systems
  • Telecommunication Systems
  • CATV
  • WDM Systems
  • FTTx
  • Fiber Optic Instruments

 


 

When to use fiber optic attenuators?

Typically, there are two situations where you will need an attenuator. First is when the fiber optic attenuator is used to reduce the receiver power. Sometimes a signal coming into the receiver may be too strong and it can interfere with the receiving elements. Usually, the receiver's energy depends on two factors: how much power is released to the fiber as well as its loss due to an attenuator. A mismatch of the transmitters' and receivers' frequencies or application of media converters designed for a much wider range can lead to excessive receiver power. In this case, optical attenuators can be permanently installed in the fiber optic link to reduce the signal power and properly match the signal level. Second is when the fiber optic attenuators are used for testing the power level margins. The attenuators are used to temporarily add a calibrated amount of signal loss to test the power level margins of the fiber optic system when testing the optic power level.

Fibertronics, Inc.’s in-line fixed cable attenuator is built to meet your low reflection attenuation requirements. Each cable assembly is custom built to meet your needs. We provide up to 10 meters of cable and fiber optic connector style of your choice.

In the 5dB, 10dB, 15dB and 20dB versions, these fiber optic fixed attenuators hold a +/-.5dB tolerance. Fiber optic connector options include ST, FC, FC/APC, LC, LC/APC, SC, SC/APC

You can inquire about different designs and features for individual applications by using the Contact Us portion of the website.

 


 

In-Line Fixed Cable Attenuator Features

  • Available in UPC or APC configurations.
  • Custom dB levels available
  • Low insertion loss
  • Interchangeable for a wide range of products
  • Easy to install

 

In-Line Fixed Cable Attenuator Applications

  • Optical Power Control and Equalization in Multi-Channel Systems
  • Telecommunication Systems
  • CATV
  • WDM Systems
  • FTTx
  • Fiber Optic Instruments

 


 

When to use fiber optic attenuators?

Typically, there are two situations where you will need an attenuator. First is when the fiber optic attenuator is used to reduce the receiver power. Sometimes a signal coming into the receiver may be too strong and it can interfere with the receiving elements. Usually, the receiver's energy depends on two factors: how much power is released to the fiber as well as its loss due to an attenuator. A mismatch of the transmitters' and receivers' frequencies or application of media converters designed for a much wider range can lead to excessive receiver power. In this case, optical attenuators can be permanently installed in the fiber optic link to reduce the signal power and properly match the signal level. Second is when the fiber optic attenuators are used for testing the power level margins. The attenuators are used to temporarily add a calibrated amount of signal loss to test the power level margins of the fiber optic system when testing the optic power level.

Customers who bought this item also bought

LC/APC to LC/APC Duplex Fiber Optic Patch Cable - 9/125µm Singlemode OS2 - 3mm Yellow PVC Rated Jacket - 5 Meters in Total Length

LC/APC to LC/APC Duplex Fiber Optic Patch Cable - 9/125µm Singlemode OS2 - 3mm Yellow PVC Rated Jacket - 5 Meters in Total Length
$12.59

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 30 Meters in Total Length

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 30 Meters in Total Length
$35.65

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 25 Meters in Total Length

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 25 Meters in Total Length
$29.89

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 20 Meters in Total Length

LC/UPC to LC/UPC Duplex Fiber Optic Patch Cable - 50/125µm Multimode OM3 - 3mm Aqua PVC Rated Jacket - 20 Meters in Total Length
$24.19