Miller® FO-CF Series Fiber Optic Center Feed Jacket Removal Tool Features & Specifications
- New fiber stripper with center feed design allows for longitudinal approach fiber stripping
- The fiber is fully supported in the stripping process of 900 micron buffer coating to 250 micron and standard 250 micron coating to 125 micron stripping
- Side mounted stripper blades provide convenient stripping of 1.6 mm to 3 mm cable jackets
- Measurement scale in inches/mm built into the tool jaw and body up to 2 3/4 in. (70 mm) for ease of proper cable preparation
- Compact, lightweight and ergonomically designed for ease of use
- All cutting surfaces are precision formed, hardened, tempered and ground assuring precise cable jacket, buffer and acrylate removal with no scratching or nicking of the fiber
- Tool is factory set and requires no adjustment
- Removable cleaning brush is conveniently attached to the stripper for periodic cleaning of stripping jaws
- FiberOptic-Center Feed Brush Part No.: 81410
- Tool supplied with its own individual protective polymer tool case for clean and safe storage
- Made in the U.S.A.
- Dimensions: 1.17 x 2.19 x 4.08 in. (29.7 x 55.6 x 103.6 mm)
- 1st Hole Application: 900 µm Tight Buffer → 250 µm Buffer Coating
- 2nd Hole Application: 250 µm Buffer Coating → 125 µm Bare Fiber
- Weight: 2.8 oz (79 g)
A cleaning brush is included with the FO-CF instrument. The quality of successive strips will be impacted by the buildup of acrylate around the stripping blades. Visually check the blade region, then use the brush to clean as necessary. Note that as fiber buffer and acrylates vary in their makeup, it is not uncommon to necessitate shorter. For fibers constructed with Kevlar yarn you should use Kevlar shears.
Fiber Optic Center Feed Stripper Instructions:
- Locate the notch you want to use. There are guides on the front
- Close the tool and pull longitudinally slowly to perform the stripping process
